DESCRIPTION

FEATURES

APPLICATION

CAP SYSTEM

• 
  SMART CAP

  – Less overspray
  – Extreme coverage
  – Fast drying
  – Hard chisel lines
  – Even coating
  – Suitably for effects
  – Dual way spraying

  INSTRUCTIONS FOR USE

  Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 5-35°C.

  TIPS:

  • Ensure the surface is clean, dry, and free of grease
  • Wear protective gloves, protective clothing, eye/face protection
  • Always paint in an open space in the open air
  • The space should be as dust-free as possible
  • Protect the surrounding area from overspray
  • Test spray on a non-visible area
  • Always spray with the can in a vertical position, otherwise the paint might ‘spit’ unevenly
  • Spray surface from a distance of 25-30cm
  • Apply in several thin layers, spraying in sweeping motions
  • Don’t go over bits you have missed, but leave to dry and then re-varnish area. Don’t go back over areas you have already done, as this can cause clouding
  • Don’t attempt to remove once applied
  • Do not use with any non-acrylic media
  • After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)