Βλέπετε 1495–1512 από 2612 αποτελέσματα
-
– NEW COLOR – Montana HELLO MY NAME Roll of StickersThe “hello my name is …” sticker, made from coated label paper, is on the roll of 500 pcs. The roll is perforated all 4 stickers, so you can easily sell them also in smaller units. A single Montana Hello my Name Stickers measures 12cm x 9cm. -
MONTANA HELLOGRAM STICKERS 12cm x 9cm
€13.00Dope Cans Sticker Hello My Name Is 100 pcs – Violet MetallicThe Dope Cans Hello My Name Is stickers in violet metallic add color and visibility to any surface. The roll contains 100 stickers measuring 12 x 8 cm, ideal for graffiti, street art or personal projects. The metallic surface creates a reflective effect that makes designs particularly eye-catching. Artists and creatives can use the stickers for tags, lettering or messages. The reliable adhesion ensures that the stickers last a long time, whether on glass, metal or wood.
Highlights:– Classic “Hello my Name Is” motif
– 100 stickers per roll
– Dimensions: 12 x 8 cm
– Metallic purple for an eye-catching shine
– Reflective surface for strong effects
– Ideal for graffiti, street art and creative projects
– Long-lasting adhesion to all surfaces
– Perfect for tags, signatures and small pieces -
MONTANA HOLOGRAM EGGSHELL STICKER
€15.00The Hologram Sticker Pack from Montana Cans contains 50 stickers of high-quality Eggshell material, once applied they only come off in very small pieces, like a poorly boiled egg. Egg Shell stickers are extremely hard to remove making them an absolute favorite for sticker artist and fans of street art slaps.! The highly reflective hologram material is from the security technology industry and so far only few suppliers exist. A little bit more expensive than the “normal ones” – but incredibly unique! Strong adhesion on many surfaces and very hard to peel! Each Montana Hologram eggshell sticker measures 10cm x 6,5cm.
-
MONTANA HOLOGRAM GLITTER 400ML
€10.00Semi gloss translucent paint is the vehicle base carrying the high quality fine holographic glitter particles for a sensational metallic effect that can add a totally new dimension to all kinds of surfaces. From paper to cardboard, primed canvas, wood, glass, metal, ceramics, porcelain, stone, acrylic and just about any other paintable surface. Once applied, the semi gloss lacquer layer will have embed a fine distribution of holographic particles over the substrate. The more coats applied, the greater the intensity of the effect. Applying a layer(s) of Montana Gloss Varnish will not only protect the surface of your work, it will also allow more light to enhance the effect further. The final result will significantly be influenced by the color and gloss level of the undercoat. The hologram glitter particles are carried in a clear base that can easily be covered with many common lacquer types. Can be combined with Montana GOLD, Montana ACRYLIC markers and conventional acrylic paints. (Not compatible with Synthetic based paints!). Please note, due to the weight of the pigments, for best results it is important to re-shake after each spray application regardless of time between sprays to guarantee the pigments are correctly mixed with the paint vehicle.
USE: For best results we recommend applying it over Montana GOLD, Shock Black SH9000 or a dark colored underground that has had time to cure, allowing contrast to occur for the glitter particles to reflect on. The Hologram Glitter spray’s clear base can easily be covered with many common lacquer types. We recommend using it in conjunction with Montana GOLD, Montana ACRYLIC markers and conventional acrylic paints. (Not compatible with Synthetic based paints!).
Shake Well! Due to the weight of the pigments, for best results it is important to shake the can well for at least 3 minutes before starting and to re-shake for at least 10 seconds after each spray application regardless of the time between sprays. This will guarantee the pigments are correctly mixed with the paint vehicle. The Hologram Glitter Effect spray is best applied to a smooth level surface to show greater light variation. Undulations in the substrates surface may detract from the impact of the holographic effect. Application of multiple, thin, light coats will build up the particle saturation and intensify the effect.
Surfaces should be clean and dry. Shake can well for 2-3 minutes! Apply the spray at a distance to the object of 20 – 30cm. Best holographic effect can be achieved on even surfaces the darker the surface, the stronger the effect. Prime object black with Montana GOLD Shock Black S9000. Let undercoat fully cure apply several thin even layers allow min. 5 minutes drying time between coats. Shake the can well again after pausing to avoid sedimentation of glitter particles the more layers, the stronger the hologram effect. Dust dry after approx. 10 min. Touch dry after approx. 60 min. Fully cured after approx. 24 hours.
-
Προσφορά!
MONTANA HOODIE TAG BY SHAPIRO GREEN
Original price was: €59.00.€47.20Η τρέχουσα τιμή είναι: €47.20.Montana Tag by Shapiro hoodie
The Tag by Shapiro Hoodie is, as the name suggests, the brainchild of Montana and graffiti artist Shapiro who designed the tag. That’s how spray styles ought to look!
Outer fabric material:
60% cotton, 40% polyester
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος -
Προσφορά!
MONTANA LOGO TYPO+LOGO ZIP HOODIE CHARCOAL
Original price was: €64.99.€51.99Η τρέχουσα τιμή είναι: €51.99.The Montana Logo Hooded Zipper is the perfekt addition for every artist or fan of the Montana markers or cans. It has a regular fit cut and ripped cuffs and on the inside you can find the well-known warning signals for cans.
The logo print on the chest is a real eyecatcher and completes the american fleece zipper.
Material: 65% cotton, 35% polyester Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος -
MONTANA METALLIC EFFECT 400ML
€11.00High-covering abrasion proof metallic effect The Montana Metallic Effect Sprays bring state of the art paint technology to traditional metallic effect colors. Loaded with a Montana Standard cap, these cans provide excellent delivery…
The Montana Metallic Effect Sprays bring state of the art paint technology to traditional metallic effect colors. Loaded with a Montana Standard cap, these cans provide excellent delivery and reliability under medium pressure output. Not only are the Montana Metallic Effect colors ideal for application on functional objects such as bikes and furniture, they can also add a metallic flare to any creative or artistic project on paper, cardboard, primed canvas, wood, glass, metal, ceramics, porcelain, stone, acrylic and other paintable materials. Made from an Acrylic-Nitro Combination base, the paint surface dries to a durable semi-gloss finish which is both hard wearing when cured (24+ hours) as well as flexible.
For best results shake can vigorously for approximately 3 minutes before use and apply at a distance of 15cm – 20cm to a pre-primed substrate. Re-shake between intervals to assure settled pigment is re-mixed. To enhance color result even further, pre-prime substrate with a similar Montana color as base. Apply in thin multiple layers, varying application strokes from vertical to horizontal on each run. Optimum use temperature is between 10 and 15 degrees Celsius. Drying time is normally around 10 mins for dust dry, 20 minutes for touch dry and 24 hours for total curing. Please note drying times vary subject to room temperature and moisture levels. To protect your artwork to its fullest, apply Montana spray Varnish in Gloss, Semi-Gloss or Matt once Metallic Effect colors have dried and cured. We do not recommend objects painted with Metallic Effect colors be exposed to high temperatures over 80 degrees Celsius.
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος -
MONTANA NIGHTGLOW LUMINESCENT 400 ML
€20.00- Color Shades:Luminescent Green
- Valve System:High-Pressure
- Gloss Level:Matte
- Lacquer Base:NC-Acrylic
- Content:400ml
Montana NIGHTGLOW is a high-grade acrylic paint which contains luminescence-pigments, that store light (absorbed energy) and emit the light in darkness. This luminiscence-effect is only visible at total darkness. The period is depending on intensity or irradation and thickness of paint layer (it is recommended to apply multiple layers of NIGHTGLOW paint lacquer on the primed surface). The highest possible degree of shining is immediately after loading the painted object then it fades away. For indoors and outdoors applications. For best glow effects use in a completely dark environment without any light sources. Use a strong source of light to load the effect paint temporarily. The effect spray is suitable for all smooth, rough or light responding primed surfaces. e. g. metal, wood, hard plastics, primed carton, walls etc. We recommend to prime the ground with WHITE 9100 to achieve best glow effects. Consider longer drying time depending on substrate. Limited resistance to weathering, light and UV-influences. To improve resistance, we recommend to varnish with VARNISH Gloss . Recommended to use with Montana Fat Caps (e.g. black / orange). AvailIable color: luminescent-green
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος -
MONTANA NYLON GLOVES
€3.50The Montana Nylon Glove is the perfect reusable protection glove. Made out of anthracite woven nylon with a polyurethane (PU) coating. Features a printed Montana Logo on the Backhand. Due to the special coating the glove has a better grip and is dirt-repellant. Available in four different sizes: Small (black lining), Medium (green lining), Large (blue lining) and Extra Large (red lining), comes as a pair. Keeps your hands warm and clean!
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος -
MONTANA POLYSTYRENE PRIMER T2200 400ML
€9.00Product information “Montana PRIMER 400ml – Polystyrene”The Montana POLYSTYRENE PRIMER is the perfect tool for the job when you want to create a neutral surface of which to apply further coatings onto polystyrene and styrofoam based surfaces. The Montana POLYSTYRENE PRIMER is ideal for sealing and preparing polystyrene and styrofoam based materials for the efficient application of further color coats. The POLYSTYRENE PRIMER assists in adhesion, maximizes coverage of further coatings, seals porous surfaces and resists against agitation of further solvent based coatings when all surface holes are covered. The Montana PLASTIC PRIMER also increases the durability of polystyrene/ Styrofoam surfaces once coated. Due to the varied chemical make-up of polystyrene, we suggest trialing on a non-visible area of your material to test for compatibility. You can apply any Montana-Cans color,TECH or EFFECT spray over the POLYSTYRENE PRIMER once it has dried and cured. Montana POLYSTYRENE PRIMER will increase the intensity and longevity of the coatings applied over it. Curing time is 24 or more hours depending on ambient temperature and moisture levels. The Montana POLYSTYRENE PRIMER is a beige/brown colored, matte coating, in a Nitro-Combi based composition which achieves a relatively neutral color base for the application of any of the Montana GOLD, Montana BLACK or Montana WHITE color range. Smooth, even application is effortless thanks to the Montana FLAT JET Medium cap which is standard on the can. To vary the spray application, why not try the Montana FLAT JET WIDE, the FAT CAP GOLD/BLACK or any of the Montana LEVEL 1-3 caps. Remember to keep your polystyrene projects away from extreme heat or flames. Ensure all surfaces are completely sealed and air holes closed coated. The rougher and more air holes the substrate has, the more coats of POLYSTYRENE PRIMER required for complete protection against further solvent based color coatings.
USE: Apply primer in several thin layers spraying before the previous coat is fully dry, but with 1 or 2 minutes between each pass. Further coats might require a drying time of 24 hours or more depending on substrate. Always test spray on a non-visible area to check compatibility of lacquer or paint. For optimal lifespan, store cans always with the nozzle on.
-
MONTANA PRIMER 400 ML T2000 PLASTIC
€10.00The Montana PLASTIC PRIMER is the perfect tool for the job when you want to create a neutral surface of which to apply further coatings onto plastic surfaces. PLASTIC PRIMER is ideal for sealing and preparing plastic materials for the efficient application of color coats. The PLASTIC PRIMER assists in adhesion, maximize coverage of further coatings, seals porous surfaces and reduces the risk of tearing and cracking. Montana PLASTIC PRIMER is a surface preparer that can be used on hard plastics such as: polyurethane (PUR), polystyrene (PS), polyamide (PA), polypropylene rubber, modified (EPDM), acrylic butadiene styrene plastics (ABS), glass-fibre reinforced plastics (GfK), hard polyvinyl chloride (Hard-PVC). Due to the varied chemical make-up of plastics we suggest trialing on a non-visible area of your material to test for compatibility. You can apply any Montana-Cans color, TECH or EFFECT spray over the PLASTIC PRIMER once it has dried and cured. Montana PLASTIC PRIMER will increase the intensity and longevity of the coatings applied over it. Curing time is 24 or more hours depending on ambient temperature and moisture levels. The Montana PLASTIC PRIMER is a semi gloss, transparent white in color in the form of a Nitro-Combi based coating which achieves a neutral color base for the application of any of the Montana GOLD, Montana BLACK or Montana WHITE color range. Smooth, even application is effortless thanks to the Montana FLAT JET Medium cap which is standard on the can. To vary the spray stroke application why not try the Montana FLAT JET WIDE, the FAT CAP GOLD/BLACK or any of the Montana LEVEL 1-3 caps. Due to possible expansion and contraction of all plastics, for best results remember to keep your plastic projects out of extreme weather conditions or temperature changes. Ensure all surfaces are clean, dry and free of all dust and oils before applying the PLASTIC PRIMER. The Montana PLASTIC PRIMER is not recommended for use with soft plastics.
USE: Apply primer in several thin layers spraying before the previous coat is fully dry, but with 1 or 2 minutes between each pass. Further coats might require a drying time of 24 hours or more depending on substrate. Always test spray on a non-visible area to check compatibility of lacquer or paint. For optimal lifespan, store cans always with the nozzle on.
-
MONTANA PRIMER 400ML T2400 METAL
€9.00Product information “Montana PRIMER 400ml – Metal”The Montana METAL PRIMER is the perfect tool for the job when you want to create a neutral surface of which to apply further coatings onto metal surfaces. With anti-oxidation properties to help resist the onset of rust, the METAL PRIMER has a matt finish and gives your metal project the longest possible lifespan, with the highest aesthetic results. Applying METAL PRIMER to your artwork or D.I.Y project will create the best possible adhesion and protection for further coatings like Montana GOLD, Montana BLACK or Montana WHITE range colors. The METAL PRIMER will also provide further protection against scratching and denting. The METAL PRIMER was developed for optimal pre-treatment of metal (Iron or brass) and mineral surfaces. Ensuring that your surface is clean, dry and free of all dust and oils before application will ensure that your Montana METAL PRIMER provides the ultimate base for further coatings. Further coating is possible with the Montana TECH, and Montana Cans color ranges. Smooth, even application is effortless thanks to the Montana FLAT JET CAP Medium, that comes standard on the can. For further application caps, why not try the FLAT JET WIDE, the FAT CAP GOLD/BLACK or any of the Montana LEVEL 1-3 caps. It is important to allow complete curing of the METAL PRIMER (24 hours or more), before applying further coatings. We suggest trialing on a non-visible area of your material to test for compatibility. Please note the Metal Primer unsuitable for priming aluminum.
USE: Apply primer in several thin layers spraying before the previous coat is fully dry, but with 1 or 2 minutes between each pass. Further coats might require a drying time of 24 hours or more depending on substrate. Always test spray on a non-visible area to check compatibility of lacquer or paint. For optimal lifespan, store cans always with the nozzle on.
-
MONTANA RUST 400ML ER8000 ORANGE BROWN
€11.00
The new Montana RUST Effect spray now available – for the illusion of rust and oxidization. Ideal for hobby, DIY, or creative projects. Apply as a single color, or both together as desired for an organic look. Can be used on different surfaces such as paper, cardboard, primed canvas, wood, glass, metal, ceramics, porcelain, stone, acrylic, and other paintable materials. The rust effect is created by a nitro-combi formulation that mimics the appearance of oxidized. Apply RUST Effect Brown, and Brown Orange on top of each other for a more organic appearance. Rust Effect can be top coated and combined with Montana GOLD, Montana ACRYLIC markers, and customary acrylic paints once completely dry. Pre-priming is required for application on polystyrene (Use Montana Styrofoam primer and make sure to seal the surface completely). Color as shown by the donut on the can. USE: Best working temperature between +10°C and +25°C. During application, protect the object and the surrounding area from spray mist. Surfaces should be dry, clean of dust, and oils before application. Shake can well for 2-3 minutes. Remove lid before use. For best results apply at 25cm from the object. Apply in thin even layers, in a sweeping motion with at least 2 min drying time between each pass. Allow 24h curing time before applying other coatings. Always test spray on a non-visible area to check the compatibility of lacquer or paint. -
MONTANA RUST 400ML ER8100 BROWN
€11.00
The new Montana RUST Effect spray now available – for the illusion of rust and oxidization. Ideal for hobby, DIY, or creative projects. Apply as a single color, or both together as desired for an organic look. Can be used on different surfaces such as paper, cardboard, primed canvas, wood, glass, metal, ceramics, porcelain, stone, acrylic, and other paintable materials. The rust effect is created by a nitro-combi formulation that mimics the appearance of oxidized. Apply RUST Effect Brown, and Brown Orange on top of each other for a more organic appearance. Rust Effect can be top coated and combined with Montana GOLD, Montana ACRYLIC markers, and customary acrylic paints once completely dry. Pre-priming is required for application on polystyrene (Use Montana Styrofoam primer and make sure to seal the surface completely). Color as shown by the donut on the can. USE: Best working temperature between +10°C and +25°C. During application, protect the object and the surrounding area from spray mist. Surfaces should be dry, clean of dust, and oils before application. Shake can well for 2-3 minutes. Remove lid before use. For best results apply at 25cm from the object. Apply in thin even layers, in a sweeping motion with at least 2 min drying time between each pass. Allow 24h curing time before applying other coatings. Always test spray on a non-visible area to check the compatibility of lacquer or paint. -
MONTANA SKETCHLINER 0.2 MM BLACK
€3.50Perfect suitable for fine, detailed works and lines. Containing a acid-free pigment ink on alcohol base, made in Japan. Waterproof & photocopy safe. Certified with the AP-Mark quality seal, the high qualitative ink guarantees a true black color. The nib is made out of strong synthetic and will not break up or fringe. Compatible with all Montana Acrylic Markers and Colors. The Sketchliner is available in six different sizes: 0.1mm, 0.2mm, 0.3mm, 0.5mm, 0.8mm & 1.2mm. Also available in a set.
-
MONTANA SKETCHLINER 0.3 MM BLACK
€3.50Perfect suitable for fine, detailed works and lines. Containing a acid-free pigment ink on alcohol base, made in Japan. Waterproof & photocopy safe. Certified with the AP-Mark quality seal, the high qualitative ink guarantees a true black color. The nib is made out of strong synthetic and will not break up or fringe. Compatible with all Montana Acrylic Markers and Colors. The Sketchliner is available in six different sizes: 0.1mm, 0.2mm, 0.3mm, 0.5mm, 0.8mm & 1.2mm. Also available in a set.
-
MONTANA SKINNY CAP AEROSOL ART
€0.40The Skinny Cap Aerosol Art is a skinny cap for a fine average spray width of ca. 1cm (0.5“). An allround skinny cap with a soft spray touch, due to the round form.
The spray width changes with the used distance to the object. For skinnier lines, spray from a closer distance. For fatter lines, spray from a further distance.The skinny cap AEROSOL ART was a turning point in cap culture due to its name suggesting it was specifically made for use in aerosol art. A much-loved cap for graffiti artists, street artists and urban artists, the AEROSOL ART cap has an average spray width of 1cm with exceptionally soft touch. As with the banana OUTLINE CAP, the slightly more rounded banana shaped body of the AEROSOL ART cap makes for a comfortable, smooth ride with a clean line ideal for line work, detail, filling in and complex application. The soft touch makes art and craft projects as well as DIY objects, easy and comfortable to coat. Fitting on all female valve cans like Montana GOLD, Montana BLACK or Montana White, the spray width of the AEROSOL ART cap varies subject to the distance applied from the substrate. For skinnier lines, spray from a closer distance. For fatter lines, spray from a further distance.
-
MONTANA SKINNY CAP BLACK/BLACK
€0.40The Skinny Cap Black/Black is a cap for fine average spray width from ca. 1-1,5cm (0.4“ to 0.6“). Perfect for Metallic Colors. The spray width changes with the used distance to the object. For skinnier lines, spray from a closer distance. For fatter lines, spray from a further distance.