MTN PRO FORGING EFFECT PAINT 400 ML

UNIVERSAL PRIMER. 400 ml, 12.2 Oz, 346 g. GENERAL DESCRIPTION White primer that acts as a bonding bridge for painting on non-absorbent surfaces. Its high anticorrosive power and good adhesion on multiple substrates make it the most universal all-rounder primer on the market. CHARACTERISTICS- Easy to apply.- Very good adhesion.- Heat resistance: 100ºC.- White.- Indoors and outdoors.- It can be used as a white finishing product.- Excellent primer for all surfaces: iron, zinc, copper, galvanised, polyester, methacrylate, melamine, polyurethane, ceramics, tiles and glass, etc.- It is not recommended for application on anodised aluminium. APPLICATION Suitable as a primer coat where increased anchorage or corrosion protection is required.- Automotive – Industry – Metal constructions- DIY – Maintenance INSTRUCTIONS FOR USE- Before use, shake the can very well for about a minute after hearing the noise of the mixing ball.- Apply on clean and dry degreased surfaces. On rusty metal surfaces, remove corrosion with a wire brush.- Apply in thin coats for best results, three thin coats- are always better than one thick coat, recoatable after ten minutes with its own primer.- Do not apply to equipment connected to the mains and use in well ventilated areas.- Safety data sheets are available. GENERAL DESCRIPTION Binder Type: Combination of synthetic resins in aliphatic and aromatic solvents Colour: White Brightness (60º): Matt appearance, gloss < 15% Dry to touch (ASTM D-1640 ISO 1517): 30’ Totally dry (ASTM D-1640 ISO 1517): 36 h Theoretical performance (continuous painting): 2.5 m2 for 400ml aerosol Solvents: Esters Recoating: After 30’ and before 2 h Product life: 5 years (stored correctly) Repainting: With its own primer: after 10 minutes. With other finishing paints: after 30 minutes up to 2 hrs or else wait 36 hrs or more. After 3 days from the application of the primer, it is recommended to sand the surface lightly to facilitate the anchoring of the subsequent coating. Heat resistance of paint: 100ºC Application conditions: Ambient temperature 8ºC Surface temperature 5-35ºC Humidity Max. 85% R.H.P